Manifold Accessories

Products 1-20 of 20
Show
Aluminum Blower Studs - 7/16 (ea)
Retail: $6.00
Price: $4.00
Availability: In Stock
Good Vibrations Motorsports Item #: B-50 -

    7/16 Blower Studs are machined from aerospace-quality 6061-T6 aluminum and anodized black. In the event of a severe backfire, studs will break and allow blower separation from manifold. This protects engine and blower from excessive damage. Also mandated by NHRA, IHRA, etc... Should be used in conjunction with a blower restraint. Hex top for ease of installing and removing. Sold Individually. ...

    12 pt Steel Nut - 7/16-20in
    Retail: $3.08
    Price: $2.50
    Availability: In Stock
    Good Vibrations Motorsports Item #: B-5070 -

      Blower Stud 12pt steel nuts are great for the those blower cases with tight clearances around the studs. Black Oxide for durability. 7/16-20. Single or Set of 8.

      Blower Manifold Mounting Bolts
      Retail: $6.00
      Price: $4.00
      Availability: In Stock
      Good Vibrations Motorsports Item #: B-70 -

        Blower Manifold Mounting Kit is made out of Grade 8, gold iridized steel, and is designed for mounting the blower manifold directly to the heads.

        Blower Manifold Mounting Studs
        Retail: $53.44
        Price: $41.99
        Availability: In Stock
        Good Vibrations Motorsports Item #: B-703 -

          Blower Manifold Mounting Stud Kit is made out of 8740 material heat treated and black oxide. Designed for mounting the blower manifold directly to the heads. 12pt Nuts makes access easier in tight spots. Kits Available for: HEMI Fathead & Fuelhead Includes:(6ea)  Studs(6ea) 12pt Chromoly Steel Non-Locking Nuts ...

          Blower Mounting Bolt Kit (8ea)
          Retail: $23.00
          Price: $18.99
          Availability: In Stock
          Good Vibrations Motorsports Item #: B-5020 -

            Blower Mounting Bolt Kit is made out of Grade 8, gold iridized steel. Features (8) 7/16-14 x 1 3/4" standard length blower bolts for mounting the blower directly to the manifold. Includes washers.

            TBS Billet Backfire Valve Kit
            Retail: $38.96
            Price: $34.99
            Availability: In Stock
            The Blower Shop Item #: B-7210 -

              TBS Backfire Valve Kits are machined from Billet aluminum. These spring loaded valves are designed to relieve excess pressure caused by mild engine backfires, as a result of that it helps prevent damage to the blower and other related components. Includes Backfire Valve Plate, two aluminum spring retainers, two backfire valve springs, two 3/8-16 x 2" bolts and washers. ...

              Weiand Backfire Valve Kit - Chevy
              Retail: $96.38
              Price: $72.44
              Availability: In Stock
              Weiand Item #: B-7217 -

                Weiand Chevy Backfire Valve Kits are machined from Cast aluminum. These spring loaded valves are designed to relieve excess pressure caused by mild engine backfires, as a result of that it helps prevent damage to the blower and other related components. Includes:(1)Backfire Valve Plate (2) Aluminum Spring Retainers (2) Backfire Valve Springs(2) 3/8-16 x 2.00 bolts and washers. ...

                Chevy Thermostat Housing Swivel-Style
                Retail: $45.96
                Price: $32.99
                Availability: In Stock
                Good Vibrations Motorsports Item #: B-7200 -

                  Polished aluminum thermostat housing. The swivel-style allows one to move the radiator hose away from the blower belt. Works on most blower manifolds. Includes bolts & o-rings.

                  Intake Water Neck Gasket
                  Retail: $2.44
                  Price: $1.95
                  Availability: In Stock
                  Good Vibrations Motorsports Item #: B-7207 -

                    Water neck housing gasket for use with the water neck housings.

                    180 Degree Preium Heavy-Duty Thermostat
                    Retail: $19.32
                    Price: $12.99
                    Availability: In Stock
                    Good Vibrations Motorsports Item #: B-7205 -

                      180° Thermostat is designed for use with most water neck housings.

                      External Billet Thermostat Housing
                      Retail: $102.38
                      Price: $78.99
                      Availability: In Stock
                      Good Vibrations Motorsports Item #: B-5120 -

                        Externally Mounted Thermostat housing is machined from Billet aluminum and accepts GM thermostat and water neck. Designed for manifolds that do not have the provisions for a thermostat or water neck. Features two AN6 and two AN10 outlets. Thermostat sold separately.

                        Burst Panels - SFI
                        Retail: $35.00
                        Price: $24.95
                        Availability: In Stock
                        Good Vibrations Motorsports Item #: B-5100 -

                          Burst Panels are made out of high quality aluminum and SFI 23.1 certified. Designed for hi-performance blown alcohol or nitro motors to prevent severe engine or supercharger damage. Length: 6.15in Width: 3.15in ...

                          Burst Panel Deflector
                          Retail: $195.00
                          Price: Discounted Prices!
                          Availability: In Stock
                          Good Vibrations Motorsports Item #: B-5112 -

                            Burst Panel Deflector is made of Billet Aluminum and is designed to direct the explosion downward towards the ground so you don't damage any fuel lines or parts that are in front of the manifold. This will be a great addition for those that run port lines in your manifold where the distribution block is located in next to the burst panel. Can also be flipped to divert upwards. ...

                            Burst Panel Blockoff
                            Retail: $32.00
                            Price: $19.99
                            Availability: In Stock
                            Good Vibrations Motorsports Item #: B-511 -

                              Burst Panel Block-off plate is made of Billet Aluminum for durability. Designed for those wishing not to run a burst panel. Also good to have in case you run out of burst panels.

                              Burst Panel Cage Kit (2pc)
                              Retail: $81.25
                              Price: $65.00
                              Availability: In Stock
                              Good Vibrations Motorsports Item #: B-5102 -

                                Burst Cage Kits allows one to mount a standard size burst panel to a blower intake. Consist of an Inner & Outer billet 6061, anodized aluminum frames. Includes 24 Grade 8 mounting bolts.

                                Burst Panel Cage - Inner Only
                                Retail: $50.00
                                Price: $35.00
                                Availability: In Stock
                                Good Vibrations Motorsports Item #: B-5103 -

                                  Burst Cage Inner Frame is machined from billet 6061, anodized aluminum. Has cross bar which allows one to use a small portion of silicone to absorb pulsation.

                                  Burst Panel Cage - Outer Only
                                  Retail: $55.00
                                  Price: $39.95
                                  Availability: In Stock
                                  Good Vibrations Motorsports Item #: B-510 -

                                    Burst Cage Outer Frame is machined from billet 6061, anodized aluminum. Allows one to mount a standard-size burst panel to a blower manifold already machined with the inner cross bar. Also bolts to burst panel adapters. Includes: 10-24 x 1/2 or 10-32 x 1/2 SS Mounting bolts. ...

                                    Tandem Burst Panel Cage Kit - PSI Blower
                                    Retail: $250.00
                                    Price: $195.00
                                    Availability: In Stock
                                    George Sitko Item #: B-5106 -

                                      Tandem Burst Cage kits are designed for the rear of a PSI blower. Consist of a Tandem Adaptor Plate with a AN3 jet installed. This allows for periodical checking of the inner burst panel. Also contains the Outer frame, 2 sfi Burst Panels and 24 Grade 8 bolts.

                                      Manifolds Burst Panel Adapters
                                      Retail: $90.00
                                      Price: $74.99
                                      Availability: In Stock
                                      Good Vibrations Motorsports Item #: B-51 -

                                        Easily adapt the pop-off valve bolt pattern to accept a burst panel.This adaptor will work on most blower manifolds that have a flat surface 3 X 6". No welding required. Plate is anodized billet aluminum. Does not include burst panel or outer cage.

                                        Burst Panel Gasket
                                        Retail: $11.50
                                        Price: $7.99
                                        Availability: In Stock
                                        Good Vibrations Motorsports Item #: B-5100.G -

                                          Burst Panel Gasket.