Products 1-5 of 5
Show
ENRICHMENT VALVE ASSEMBLY - ELECTRONIC
Retail: $376.25
Price: $275.99
Availability: In Stock
Fuel Injection Ent (FIE) Item #: FI-5103 -

    This 12VDC Fuel Enrichment valve boasts 3500 PSI operating pressure, 11 GPM flow (@50 PSI pressure drop), -8 female ports and draws less than 1.7A. The most common use is as an enrichment device in a mechanical fuel injection system. Since this valve is always open until activated, the user would strategically split up the main pill area and put some of it in this valve and the rest in the main pill location on the injection unit. When enrichment is desired, the valve is activated and the...

    LEAN OUT VALVE ASSEMBLY - ELECTRONIC
    Retail: $376.25
    Price: $275.99
    Availability: In Stock
    Fuel Injection Ent (FIE) Item #: FI-5101 -

      This fantastic valve isn't just a re-purposed nitrous solenoid. Nitrous valves pull too much current, have tiny little 1/8 NPT ports, and don't flow nearly enough. Other similar industrial valves can't function reliably under high enough pressure to be useful or have seals/seats that are incompatible with methanol or nitromethane. This 12VDC valve boasts 3500 PSI operating pressure, 11 GPM flow (@50 PSI pressure drop), -8 female ports and draws less than 1.7A. It is simply the BEST we've ever...

      Air Bleed - Straight (1/8 Pipe - 5/32 Hole)
      Retail: $5.99
      Price: $3.98
      Availability: In Stock
      Item #: P-2310 -

        These straight Air Bleed Fittings are great for making small adjustments to the amount of air flowing into your injector while either on the starting line or in the pits. By removing the plug (p/n P-2340) from the Air Bleed Fitting you will allow for more airflow to enter the injector. This will cause your motor to run slightly more lean. Usually installed in the injector above the blower. Dimensions: 1/8in Pipe - 5/32in Hole ...

        Air Bleed - 90 Deg. (1/8 Pipe - 5/32 Hole)
        Retail: $6.99
        Price: $4.29
        Availability: In Stock
        Item #: P-2320 -

          These 90 Degree Air Bleed Fittings are great for making small adjustments to the amount of air flowing into your injector while either on the starting line or in the pits. By removing the plug (p/n P-2340) from the Air Bleed Fitting you will allow for more airflow to enter the injector. This will cause your motor to run slightly more lean. Usually installed in the injector above the blower. Dimensions: 1/8in Pipe - 5/32in Hole ...

          Air Plug 5/32
          Retail: $3.99
          Price: $1.97
          Availability: In Stock
          Item #: P-2340 -

            This 5/32 Air Plug is to be used with p/n P-2310 or P-2320 to allow small adjustments to air to fuel ratios.