This is a TEST Website - Coming Soon! - Visit us at:
www.GoodVibesRacing.com

Good Vibrations Motorsports is the "Official Supercharging of IHRA"

We Stock Premium Quality Superchargers and Components at Discount Prices!

Blowers, Drive Kits, Manifolds & Spacers, Belts & Pulleys, V-Grooves & Spacers, Snouts & Couplers, Idler Brackets & Pulleys, Crank Hubs, Burst Panels, Belts Guards, Gaskets, Scoops, Carb Adapters, Stainless Steel Carb Plumbing, Bearing Plates & Front Covers, Boost Memory Kits, Crank Supports, Crank Triggers, Degree Rings & Crank Bolts, Bearings & Seals, Linkage Kits, Blower Components, and more!



Products 1-48 of 196
Show
Hampton 460 Ford Blower Manifold (2pc)
Retail: $1,260.00
Price: $972.99
View
Availability: In Stock
Hampton Blowers Item #: B-7127 -

    429-460 Ford V8 2pc Blower Manifold is machined from cast aluminum and is 7.59" tall. Includes a factory-style water outlet and accepts up to an 8.71 blower. This intake has a tented floor for better fuel delivery and has provisions for port nozzles to be installed for more accurate tuning of each cylinder. Also offers room for a backfire valve or can be modified for a burst panel to be machined into it. Designed for factory CJ heads. Water neck not included. (Polishing Optional) ...

    1/2in Pitch Blower Belts
    Retail: $100.00
    Price: $49.00
    View
    Availability: In Stock
    Good Vibrations Motorsports Item #: BB- -

      1/2" Pitch Blower belts are constructed from rubber with fiberglass tensile nylon facing for low friction and wear resistance. Features high resistance to elongation and good length stability. Belt can be back-bent.

      1/2in Pitch Blower Pulleys
      Retail: $106.40
      Price: $71.99
      View
      Availability: In Stock
      Good Vibrations Motorsports Item #: 500- -

        1/2" Pitch Blower Pulleys are machined from polished billet 6061 aluminum and T6 heat treated for performance and durability. Pulleys are 3.5" wide with a 2" center register. Ideal for ratios up to 15% O.D.

        10.71 Billet Blower - Hard Anodized Billet Rotors - Teflon
        Retail: $4,985.60
        Price: $3,770.99
        View
        Availability: In Stock
        The Blower Shop Item #: TBS-2030 -

          The Blower Shop 10.71 Supercharger designed for high performance race/street applications using Pump Gas, Race Gas, E85, Alcohol or Nitro. Equipped with a 3-lobe helical Billet Rotors with Hard Anodizing and Teflon Stripping. The Blower Shop has designed a superior billet case that exceeds expectations. Has 13.25in center to center bolt pattern, excepts carb adapter plates or fuel injection. Made in the USAFeatures:*Billet Case*Billet Rotors*Billet Front & Rear Bearing Plates*Hard Anodizing...

          14.71 Billet Blower - Hard Anodized Billet Rotors - Teflon
          Retail: $5,182.40
          Price: $4,048.75
          View
          Availability: In Stock
          The Blower Shop Item #: TBS-2050 -

            The Blower Shop 14.71 Supercharger designed for high performance race/street applications using Pump Gas, Race Gas, E85, Alcohol or Nitro. Equipped with a 3-lobe helical Billet Rotors with Hard Anodizing and Teflon Stripping. The Blower Shop has designed a superior billet case that exceeds expectations. Has 13.25in center to center bolt pattern, excepts carb adapter plates or fuel injection. Made in the USAFeatures:*Billet Case*Billet Rotors*Billet Front & Rear Bearing Plates*Hard Anodizing...

            2in Blower Spacer - Billet Aluminum
            Retail: $498.00
            Price: $465.00
            View
            Availability: In Stock
            Good Vibrations Motorsports Item #: B-723 -

              Blower spacer is machined from Billet aluminum (not cast) and designed to raise the blower 2 inches. Has an o-ring groove machined into the top to seal against the blower. Spacers can be stacked for additional height! Includes: O-Ring and Anodized Stud Kit (B-5045.K)Options: Plain Aluminum or Anodized Black ...

              3.90" Blower Snout - 1.125in Shaft (Street/Strip)
              Retail: $406.38
              Price: $298.00
              View
              Availability: In Stock
              Good Vibrations Motorsports Item #: B-5300 -

                Short blower drive snout is machined from billet aluminum and is 3.90" long. Has a 2" diameter pulley register and accepts pulleys with the popular 6-hole 2.760" bolt pattern. Features an 1 1/8" diameter 48-spline 4100 series heat-treated shaft. O-ring sealed for quick and easy maintenance. Housing OD is 3.370". Includes 6ea 5/16-18" socket head mounting bolts. Use B-5302 gear coupler (not included). ...

                3.90" Blower Snout - 1.250in Shaft (Competition)
                Retail: $395.00
                Price: $289.99
                View
                Availability: In Stock
                Good Vibrations Motorsports Item #: B-5340 -

                  3.90" long Blower Snout is machined from billet aluminum with 4100 series heat-treated, 48-spline 1.250" diameter steel shaft. Accept pulleys with 2" register and the popular six bolt 2.760" bolt pattern. Features an o-ring on the bottom for a secure seal between snout & blower and to expedite maintenance.Has internal heavy-duty, double ball bearing for competition use. Front of shaft is broached to allow one to turn over the blower with a 1/2" ratchet. Housing OD is 3.380". Includes six...

                  3.90" Snout Drive Shaft - 1.125in Shaft (For B-5300 Snout)
                  Retail: $178.50
                  Price: $149.95
                  View
                  Availability: In Stock
                  Good Vibrations Motorsports Item #: B-5304 -

                    Blower Snout Drive Shaft is made out of 4100 heat-treated steel. Features a 48-spline shaft, 1.125" diameter shaft. Ideal for street/ strip use. Bearing, seal and snap ring not included.

                    6.71 Blower Bearing & Seal Kit (Street/Strip)
                    Retail: $125.00
                    Price: $89.99
                    View
                    Availability: In Stock
                    Good Vibrations Motorsports Item #: G-3320 -

                      Bearing and Seal kit for Street applications. Features (2) heavy-duty front blower bearings, (2) sealed rear bearings and (4) heavy-duty, dual lip Teflon seals.

                      Billet Aluminum Beltguard - Standard Roots
                      Retail: $150.00
                      Price: $139.00
                      View
                      Availability: In Stock
                      Good Vibrations Motorsports Item #: B-5 -

                        Belt Guards are machined from billet 6061 aluminum and highly polished or Anodized Black. Fits most roots & screw blowers and assembled with stainless steel fasteners. Designed to protect hoses in the event of a blower belt failure. No additional mounting hardware is required. The belt guards are available from 6 to12" in lengths. Each will fit up to a 7" diameter upper pulley. NHRA/ IHRA Accepted. ...

                        Billet Blower Front Cover - All Round
                        Retail: $218.75
                        Price: $188.99
                        View
                        Availability: In Stock
                        Good Vibrations Motorsports Item #: B-5220 -

                          All Round Blower Front Cover is machined from billet aluminum. Has provisions for the pressure relief valve B-5316 and oil level sight gauge B-5138 (PR valve and gauge not included). Please inspect your blower to determine which style front cover you will need. Choose Options: un-polished or Polished ...

                          Blower Drive Kits - SBC Internally Balanced
                          Retail: $1,413.75
                          Price: $993.99
                          View
                          Availability: In Stock
                          Good Vibrations Motorsports Item #: B-316- -

                            Drive Kits are made for a variety of engines and made out of polished billet aluminum and steel alloys to ensure maximum performance and durability. These kits are designed for your application and includes a drive snout with o-ring seal on the bottom, gear coupler, two pulleys, idler pulley, idler bracket kit and mounting hardware, blower belt, internal or external chromoly steel crank hub, accessory V-groove pulley, bolts, spacers and instructions.Choose Options:- 1 V-Groove- 2 V-Grooves-...

                            Blower Idler Pulleys - With Standoff
                            Retail: $157.50
                            Price: $129.99
                            View
                            Availability: In Stock
                            Good Vibrations Motorsports Item #: B-609 -

                              Idler Pulley is machined from billet 6061-T6 aluminum. Features two offset, double-ball bearings allowing one to alter the spacing by 1.00in. A machined crowned center helps keeps the belt centered. Includes: Idler Pulley, Aluminum Standoff and Hardened Washer. Choose Width: 2.10", 3.10" or 3.35" Choose Diameter: 3.25" or 4.5"Choose Colors: Raw Aluminum, Show Polished or Black Anodized ...

                              Blower Lube
                              Retail: $26.43
                              Price: $18.99
                              View
                              Availability: In Stock
                              Good Vibrations Motorsports Item #: G-3152 -

                                Penetrating Blower lubricant with Teflon is designed to lubricate and coat the rotors of Standard Roots superchargers. This formulated gel adheres to the rotors creating tighter tolerances thus, resulting in higher efficiency and increased boost levels. Due to it's high molecular weight and resistance to extreme temperatures, it is compatible with Gas, E85, Alcohol and Nitromethane fuels. ...

                                Blower Mounting Bolt Kit (8ea)
                                Retail: $23.00
                                Price: $18.99
                                View
                                Availability: In Stock
                                Good Vibrations Motorsports Item #: B-5020 -

                                  Blower Mounting Bolt Kit is made out of Grade 8, gold iridized steel. Features (8) 7/16-14 x 1 3/4" standard length blower bolts for mounting the blower directly to the manifold. Includes washers.

                                  Blower Pulley Spacers
                                  Retail: $25.00
                                  Price: $19.95
                                  View
                                  Availability: In Stock
                                  Good Vibrations Motorsports Item #: B-23 -

                                    Blower Pulley Spacers are machined from 6061 billet aluminum. Has a six hole blower pulley bolt pattern to match up to standard crank hubs and blower snouts. Features 2" male front and female rear register and a wide range of widths to choose from.

                                    Degree Rings - Crank Hub (Press-On)
                                    Retail: $85.50
                                    Price: $69.99
                                    View
                                    Availability: In Stock
                                    Good Vibrations Motorsports Item #: B-203 -

                                      Degree Rings are machined from billet aluminum and are designed to work with crank hubs that are scalloped for degree rings. Each ring is marked in 1-degree increments with a slightly longer mark for 5 degrees and the longest mark denotes 10 degrees. Choose Options: 6 3/8" or 7in Diameters, with rare earth magnets or no magnets, offset for internally bearing support or standard. ...

                                      RCD SBC Crank Bolts - Premium
                                      Retail: $45.87
                                      Price: $37.99
                                      View
                                      Availability: In Stock
                                      RCD Engineering Item #: RCD-358843- -

                                        RCD Crank Bolts are machined from heat-treated chrome-moly steel and finished in black oxide. Bolt measures: 7/16-20 with a 1.95" flange, most commonly found on SBC. They are some of the strongest bolts available.Choose Options: 1.25in Long or 1.85in Long ...

                                        SB Chevy Billet Crank Supports
                                        Retail: $655.50
                                        Price: $483.99
                                        View
                                        Availability: In Stock
                                        Good Vibrations Motorsports Item #: B-24 -

                                          Bearing support is professionally machined from billet aluminum. Features the ability to extend bearing housing (with longer stands) to improve full crank hub engagement (re: front engine mount, V-groove pulleys, etc..).Consist of: Front plate with bearing, four billet standoffs, two wing supports and aerospace grade mounting hardware.Choose Options: Raw Aluminum or Black AnodizedChoose Options: Standard Housing and Stands or Extended Housing and Stands (for V-Grooves or spacing issues) ...

                                          SB Chevy Blower Crank Hubs
                                          Retail: $150.00
                                          Price: $108.99
                                          View
                                          Availability: In Stock
                                          Good Vibrations Motorsports Item #: B-204 -

                                            SBC crank hubs are machined from Billet chrome-moly steel and oxidized black. Measures 2.250" from where the blower pulley seats to the crank gear.Features one 3/16" keyway and one 1/4" keyway 180° apart and 3/8 - 24" threaded holes on a 2.760" bolt center. Features a scallop machined profile around the holes to accommodate a press-on degree ring (sold separately). Choose Options: 350 SBC Internally Balanced - 350 SBC Internally Balanced with V-Groove - 400 SBC Externally Balanced ...

                                            SBC Bearing Support Crank Hub - 3/16 & 1/4in Keyways
                                            Retail: $400.00
                                            Price: $329.99
                                            View
                                            Availability: In Stock
                                            Good Vibrations Motorsports Item #: B-2046 -

                                              Internally Balanced Crank Hubs are machined from billet chrome-moly steel and oxidized black. Extra long to work with Bearing Supports. Features one 3/16 keyway and one 1/4" keyway 180° apart and 3/8 - 24" threaded holes on a 2.760" bolt center. Features a scallop machined profile around the holes to accommodate a press-on degree ring (sold separately). ...

                                              SBC Engine Mount Idler Bracket
                                              Retail: $137.50
                                              Price: $109.99
                                              View
                                              Availability: In Stock
                                              Good Vibrations Motorsports Item #: B-604 -

                                                SBC Engine Mounted Idler Bracket is CNC machined from billet aluminum and either highly polished or Black Anodized. Bolts to the engine block where your water pump would normally mount. Designed for competition or marine applications. Offers a wider range of belt tension than blower mounted brackets. Use .750 wide T-nuts . Kits Includes: Bracket, Chromoly T-Nut, Cad-plated bolts and Alum Standoffs (spacers) w/ water outlets. ...

                                                Snout Mounted Idler Bracket
                                                Retail: $171.00
                                                Price: $119.99
                                                View
                                                Availability: In Stock
                                                Good Vibrations Motorsports Item #: B-6007 -

                                                  Snout Mounted Idler Bracket clamps onto the snout which allows for a broad range of belt adjustment. Bracket is machined from billet aluminum for strength and durability. Works on B-5XXX series and BDS snouts. Will fit other snouts if the outside diameter equals 3.370". Utilizes a 5/8 coarse thread bolt (sold separately). ...

                                                  Weiand 331-392 Hemi Street Blower Manifold - Pop-Off Valve
                                                  Retail: $690.23
                                                  Price: $568.99
                                                  View
                                                  Availability: In Stock
                                                  Weiand Item #: B-7153 -

                                                    WEIAND Blower Manifold Chrysler 331,354,392 HEMI

                                                    Weiand BBC Street Blower Manifold - Pop-Off Valve
                                                    Retail: $479.39
                                                    Price: $428.99
                                                    View
                                                    Availability: In Stock
                                                    Weiand Item #: B-7113 -

                                                      Weiand Street Manifold (Standard deck) Satin Finish.Features: Rear Mounted Pop Off PlateStandard deck only Boost Gauge PortFits: Chevrolet Big Block 396-502 Rectangle Port ...

                                                      Weiand SBC Street Blower Manifold - Pop-Off Valve
                                                      Retail: $482.96
                                                      Price: $399.99
                                                      View
                                                      Availability: In Stock
                                                      Weiand Item #: B-7103 -

                                                        WEIAND Blower Manifold Chevrolet Small Block 1955-1986. Choose Finish: Satin Finish or Polished Finish

                                                        1/2in Pitch Blower Pulleys - 2.25in Center Register
                                                        Retail: $106.40
                                                        Price: $79.00
                                                        View
                                                        Availability: In Stock
                                                        Good Vibrations Motorsports Item #: 500W- -

                                                          1/2" Pitch Blower Pulleys are machined from polished billet 6061 aluminum and T6 heat treated for performance and durability. Ideal for ratios up to 15% O.D.Pulleys are: 3.5in wide with a 2.25in center register. (Weiand and old Cragar style). ...

                                                          10.71 Billet RACE Blower - Hard Anodized Billet Rotors - Teflon
                                                          Retail: $5,313.60
                                                          Price: $4,317.99
                                                          View
                                                          Availability: In Stock
                                                          The Blower Shop Item #: TBS-203 -

                                                            The Blower Shop 10.71 Race Supercharger is designed for high performance racing applications using alcohol or nitro. This blower has been machined so preciously that you must tow your car to the staging lane when using this blower. The blower is equipped with a 3-lobe Billet rotor either in a helical or High-Helix. The inserts on top allow you to adjust the opening of the blower which will allow for optimal tuning for your fuel injection unit. Has a 13.25in center to center bolt pattern. Made...

                                                            14.71 Billet RACE Blower - Hard Anodized Billet Rotors - Teflon
                                                            Retail: $5,867.10
                                                            Price: $4,967.48
                                                            View
                                                            Availability: In Stock
                                                            The Blower Shop Item #: TBS-205 -

                                                              The Blower Shop 10.71 Race Supercharger is designed for high performance racing applications using alcohol or nitro. This blower has been machined so preciously that you must tow your car to the staging lane when using this blower. The blower is equipped with a 3-lobe Billet rotor either in a helical or High-Helix. The inserts on top allow you to adjust the opening of the blower which will allow for optimal tuning for your fuel injection unit. Has a 13.25in center to center bolt pattern. Made...

                                                              4in Blower Spacer - Polished Cast Aluminum
                                                              Retail: $654.75
                                                              Price: $589.00
                                                              View
                                                              Availability: In Stock
                                                              Good Vibrations Motorsports Item #: B-722 -

                                                                Blower spacer is manufactured from cast aluminum and highly polished. Designed to raise the blower 4 inches. Includes: Two Gaskets and 8 Aluminum Studs (Six Standard & Two .500 longer to fix throttle bracket).Burst Panel Machining OptionIncludes: sfi Burst Panel, Cage Kit w/ Bolts, Two Gaskets and 8 Aluminum Studs (Six Standard & Two .500 longer to fix throttle bracket). ...

                                                                5.25" Blower Snout - 1.250in Shaft (Competition)
                                                                Retail: $425.00
                                                                Price: $299.99
                                                                View
                                                                Availability: In Stock
                                                                Good Vibrations Motorsports Item #: B-5350 -

                                                                  5.25" long Blower Snouts is machined from billet aluminum with 4100 series heat-treated 48-spline 1.250" diameter steel shaft. Accept pulleys with 2" register and the popular six bolt 2.760" bolt pattern. Features an o-ring on the bottom for a secure seal between snout & blower and to expedite maintenance.Has internal heavy-duty, double ball bearing for competition use. Front of shaft is broached to allow one to turn over the blower with a 1/2" ratchet. Housing OD is 3.380". Includes six...

                                                                  5.75" Blower Snout - 1.125in Shaft (Street/Strip)
                                                                  Retail: $468.75
                                                                  Price: $338.00
                                                                  View
                                                                  Availability: In Stock
                                                                  Good Vibrations Motorsports Item #: B-5310 -

                                                                    Medium blower drive snout is machined from billet aluminum and is 5.75" long. Has a 2" diameter pulley register and accepts pulleys with the popular 6-hole 2.760" bolt pattern. Features an 1 1/8" diameter 48-spline 4100 series heat-treated shaft. O-ring sealed for quick and easy maintenance. Internal heavy-duty double ball bearings. Housing OD is 3.370".Includes 6ea 5/16-18" socket head mounting bolts. Use B-5302 gear coupler (not included). ...

                                                                    5.75" Snout Drive Shaft - 1.125in Shaft (For B-5310 Snout)
                                                                    Retail: $209.50
                                                                    Price: $169.99
                                                                    View
                                                                    Availability: In Stock
                                                                    Good Vibrations Motorsports Item #: B-5314 -

                                                                      Blower Snout Drive Shaft is made out of 4100 heat-treated steel. Features a 48-spline shaft, 1.125" diameter shaft. Ideal for street/ strip use. Bearing, seal and snap ring not included.

                                                                      6.71 Billet Blower - Hard Anodized Billet Large Bore Rotors - Teflon
                                                                      Retail: $3,936.00
                                                                      Price: $3,075.99
                                                                      View
                                                                      Availability: In Stock
                                                                      The Blower Shop Item #: TBS-2018 -

                                                                        The Blower Shop 6.71 Supercharger designed for high performance racing applications using Race Gas, E85, Alcohol or Nitro. Equipped with Hard Anodized Billet Rotors with Teflon Stripping (6pt or 18pt Teflon Choose Options). The Blower Shop has designed a superior billet case that excepts Large Bore rotors. Has 13.25in center to center bolt pattern, excepts carb adapter plates or fuel injection. Features:* Billet Polished Case* Billet Rotors* Billet Front & Rear Bearing Plates One of the finest...

                                                                        6.71 Blower Bearing & Seal Kit (Competition)
                                                                        Retail: $138.00
                                                                        Price: $119.99
                                                                        View
                                                                        Availability: In Stock
                                                                        Good Vibrations Motorsports Item #: G-3322 -

                                                                          Bearing and Seal kit for Competition applications only. Features (2) heavy-duty front blower bearings,(2) heavy-duty rear blower bearings and (4) premium, dual lip Teflon seals.

                                                                          8mm Rubber Blower Belts
                                                                          Retail: $157.50
                                                                          Price: $69.00
                                                                          View
                                                                          Availability: In Stock
                                                                          Good Vibrations Motorsports Item #: BB-8- -

                                                                            8mm Blower belts are constructed from neoprene with fiberglass cords. Proven extremely durable for many street/ strip and performance applications. Belt can be back-bent.

                                                                            Aluminum Blower Studs - 7/16 - 2.50in Long
                                                                            Retail: $6.00
                                                                            Price: $4.00
                                                                            View
                                                                            Availability: In Stock
                                                                            Good Vibrations Motorsports Item #: B-502 -

                                                                              7/16 Blower Studs are machined from aerospace-quality 6061-T6 aluminum and anodized black. In the event of a severe backfire, studs will break and allow blower separation from manifold. This protects engine and blower from excessive damage. Also mandated by NHRA, IHRA, etc... Should be used in conjunction with a blower restraint. Hex top for ease of installing and removing. Choose Options:-Sold Individually-Stainless Steel Nuts and Washers-12pt Nuts ...

                                                                              BB Chevy Billet Crank Supports
                                                                              Retail: $655.50
                                                                              Price: $483.99
                                                                              View
                                                                              Availability: In Stock
                                                                              Good Vibrations Motorsports Item #: B-2 -

                                                                                Bearing support is professionally machined from billet aluminum. Features the ability to extend bearing housing (with longer stands) to improve full crank hub engagement (re: front engine mount, V-groove pulleys, etc..).Consist of: Front plate with bearing, four billet standoffs, two wing supports and aerospace grade mounting hardware.Choose Options: Raw Aluminum or Black AnodizedChoose Options: Standard Housing and Stands or Extended Housing and Stands (for V-Grooves or spacing issues) ...

                                                                                BB Chevy Blower Crank Hubs
                                                                                Retail: $150.00
                                                                                Price: $108.99
                                                                                View
                                                                                Availability: In Stock
                                                                                Good Vibrations Motorsports Item #: B-20 -

                                                                                  BBC crank hubs are machined from Billet chrome-moly steel and oxidized black. Measures 1.600" or 2.100" from where the blower pulley seats to the crank gear. Choice of: Two 1/4 Keyways, or One 1/4 and One 3/16. Has standard 6 holes ( 3/8 - 24") on a 2.760" bolt center. Features a scallop machined profile around the holes to accommodate a press-on degree ring (sold separately). Very popular on blown gas and alcohol Available in: Internally Balanced, Externally Balanced applications ...

                                                                                  BBC Bearing Support Crank Hub
                                                                                  Retail: $425.00
                                                                                  Price: $329.99
                                                                                  View
                                                                                  Availability: In Stock
                                                                                  Item #: B-205 -

                                                                                    Internally Balanced Crank Hubs are machined from billet chrome-moly steel and oxidized black. Extra long to work with Bearing Supports. Features Two Keyways 180 degrees apart and 3/8 - 24 threaded holes on a 2.760 bolt center. Features a scallop machined profile around the holes to accommodate a press-on degree ring (sold separately).Note: Engines with stock, short water pumps or alternators in the stock location requires a special, shorter hub. Please call or email for details.Choose Options:...

                                                                                    BBC Engine Mount Idler Bracket
                                                                                    Retail: $137.50
                                                                                    Price: $109.99
                                                                                    View
                                                                                    Availability: In Stock
                                                                                    Good Vibrations Motorsports Item #: B-605 -

                                                                                      BBC Engine Mounted Idler Bracket is machined from .750 billet thick 6061-T6 aluminum and highly polished or Black Anodized. Designed for competition applications and mounts to the engine block. Designed to fit all BBC, KB Olds, Rodeck and 481X. Offers a wider range of belt tension than blower mounted brackets. Kit Includes: Bracket, T-nut, AN8 water outlet Standoffs and Cadium-plated bolts.Outboard Support Kits Includes: 3.100" Idler Pulley with standoffs and support bracket ...

                                                                                      Billet Aluminum Beltguard - SSI 3-Hole
                                                                                      Retail: $175.00
                                                                                      Price: $159.00
                                                                                      View
                                                                                      Availability: In Stock
                                                                                      Good Vibrations Motorsports Item #: B-501 -

                                                                                        Belt Guards are machined from Billet 6061 aluminum and highly polished or Black Anoidized. Fits blowers with 3 mounting holes on the front cover such as: Kobelco, SSI, PSI (non-screw) etc... Assembled with Stainless Steel fasteners. Designed to protect hoses in the event of a blower belt failure. The belt guards are available in 6 or 7.5" lengths. Each will fit up to a 7" diameter upper pulley. NHRA/ IHRA Accepted. ...

                                                                                        Billet Blower Front Cover - Half Round
                                                                                        Retail: $218.75
                                                                                        Price: $188.99
                                                                                        View
                                                                                        Availability: In Stock
                                                                                        Good Vibrations Motorsports Item #: B-5224 -

                                                                                          Half Round (Driver-side) Blower Front Cover is machined from billet aluminum. Cover has provisions for the B-5136 pressure relief valve and B-5138 oil level sight gauge (valve and gauge not included). Please inspect your blower to determine which style front cover you will need.Choose Options: Un-Polished or Polished ...

                                                                                          Blower Drive Kits - BBC Internally Balanced
                                                                                          Retail: $1,413.75
                                                                                          Price: $993.99
                                                                                          View
                                                                                          Availability: In Stock
                                                                                          Good Vibrations Motorsports Item #: B-326- -

                                                                                            Drive Kits are made for a variety of engines and made out of polished billet aluminum and steel alloys to ensure maximum performance and durability. These kits are designed for your application and includes a drive snout with o-ring seal on the bottom, gear coupler, two pulleys, idler pulley, idler bracket kit and mounting hardware, blower belt, internal or external chromoly steel crank hub, accessory V-groove pulley, bolts, spacers and instructions.Choose Options:- 1 V-Groove - 2 V-Grooves- 3...

                                                                                            Blower Mounted Idler Bracket
                                                                                            Retail: $85.00
                                                                                            Price: $64.99
                                                                                            View
                                                                                            Availability: In Stock
                                                                                            Good Vibrations Motorsports Item #: B-600 -

                                                                                              L-Shaped Idler Pulley Bracket is machined from .500 thick billet aluminum and highly polished. Designed to mount directly to the front of the blower. Offers 3/4" more adjustment than similar brackets for a wider range of belt tension. Use .750 wide T-nutsKit includes: Idler Pulley Bracket, Chromoly .750 T-Nut, Premium Mounting Hardware and Alum Standoffs.Long Kit Includes an extra idler pulley spacer for a multiple v-groove setup. ...

                                                                                              Blower Teflon Stripping - .125  Half Round
                                                                                              Retail: $4.00
                                                                                              Price: $1.99
                                                                                              View
                                                                                              Availability: In Stock
                                                                                              Good Vibrations Motorsports Item #: G-3125 -

                                                                                                Teflon is for roots style blowers. Width = .250 Height = .125. Must order in 6ft Lengths.

                                                                                                Hampton 440 Mopar Blower Manifold (2pc)
                                                                                                Retail: $1,007.50
                                                                                                Price: $825.99
                                                                                                View
                                                                                                Availability: In Stock
                                                                                                Hampton Blowers Item #: B-7140 -

                                                                                                  Hampton Blower Manifold Chrysler 440 MoparHeight 6.3125 Tall